CHILL selling OUT, Fireplace Draft Eliminator

THE ORIGINAL CHILL OUT, FIREPLACE DRAFT ELIMINATOR (Please read, very important information for proper ordering)


*******If you are covering a gas fireplace, you must NEVER have this cover installed on your fireplace while the pilot light is lit******


Please understand that during the winter months, I'm flooded with selling special order requests. Multiple emails from multiple customers will slow down my production time. These ordering instructions have been provided to allow a simple process for placing a special order. Everything that I need to complete your order and provide a cover that will fit as best as possible has been explained in the instructions.



Be ready for those cold fall nights, and even colder winter weather. THE ORIGINAL CHILL OUT, Fireplace Draft Eliminator will help to keep your house warm and toasty.

This Fireplace Draft Eliminator is the solution. Not only will it keep the cold out and the valuable heat inside your house, it will look nice while doing so. Easy to install and remove when you want to use the fireplace. Folds neatly and is small enough to tuck in a drawer when not in use.

This is for use on gas fireplace insets or any fireplace with metal framed glass doors or a metal mesh screen. If your fireplace is open and doesn't have metal on all four sides, this cover won't work for you unless you purchase a standing fireplace screen from a retailer. This cover than can be made to attach to that screen.

The CHILL OUT, Draft Eliminator is constructed from three very special layers of fabric; a decorative cover, an insulated center, and an extra protective backing. It attaches to the front of the fireplace with magnets.

The colors and style are neutral and will blend with any decor. The fabrics aren't overwhelming designs or patterns. In fact, most of the fabrics being used are solid colors. (Exact fabric choices may vary from those in the photographs.)



PLEASE NOTE, THIS COVER IS NEVER TO BE PLACED ON A FIREPLACE THAT WAS RECENTLY USED AND IS STILL HOT! DO NOT PLACE IT ON THE FIREPLACE WHILE EMBERS BURN DOWN EITHER.

If you are looking for a cover that's safe for that purpose, please look on-line. I've seen them for sale there and they're made out of Pavinex, a fire resistant fabric. THIS COVER IS NOT FIRE RETARDANT!!!!!!



IF YOU DON'T READ THE ORDERING INSTRUCTIONS AND YOUR COVER DOESN'T FIT PROPERLY, I'LL DO MY BEST TO REMEDY IT, but IT WILL BE AT YOUR COST.

Please check to make sure a magnet sticks to your fireplace enclosure. Not all metals are ferrous.



MEASURING and ORDERING INSTRUCTIONS;

Choose the size that is closest to the LARGEST measurement of your fireplace:

Measure the ENTIRE METAL AREA, not just the area of the firebox opening.

$63 small, (31”x 29”) 4 magnets
$86 medium, (38”x 35”) 6 magnets
$100 large, (40” up to 44”) 8 magnets
$115 X large, (45” up to 49”) 8 magnets
$130 XX large, (50” up to 54”) 10 magnets
$150 jumbo, (55”up to 60”) 10 magnets
Anything over 60” will need to be quoted by seeing a photo of the fireplace.

There may be a slightly higher price associated with some special orders.

*****If your fireplace has handles or a protruding vent hood. I will need to add up to two inches to your Draft Eliminator to accommodate them.*****This may put your cover into the next size category. Please plan that when ordering.
It is best to cover the entire metal
area.
Specify the actual dimensions of the metal fireplace enclosure: width (horizontal) x height (vertical) in the comment section of the order form. This will let me know that you wish to have a custom sized cover made.

Select your color choice.


A photo of your fireplace is necessary for magnet placement and all custom sized covers. If this isn't provided when your order is placed, I can not make your cover and your order will be delayed or possibly cancelled.

Your CHILL OUT, Fireplace Draft Eliminator will come to you with magnets sewn in place as follows:

Small: 4 magnets stitched onto corners
Medium: 6 magnets; 3 across the top and bottom
Large and X large: 8 magnets; 3 across the top and bottom and 1 on each side
XX large and Jumbo: 10 magnets.

****Handles or protruding vent hoods will cause the cover to gap. Additional magnets may be needed to keep this from happening.****

EXTRA MAGNETS
Sets of two are listed in my Etsy shop as a separate item. If you want additional magnets, please add them to your order prior to checking out.
I'm happy to sew them on for you, but you may also wish to wait until your Draft Eliminator is installed to see where it may gap open. If you wait to add them yourself, they need to be hand sewn in place. I've tried using adhesive Velcro and I don't recommend it. The magnets are very strong and can cause damage to the thermal fabric when removing The Draft Eliminator from the fireplace.

HEALTH WARNING: This product uses magnets to hold it in place. People with pacemakers may need to exercise caution around this product.

This product provides exceptional results for draft control. A small amount of airflow may remain after Installation and varies based on fireplace style, construction, and number of magnets placed on the cover.

All refund requests must be approved by shop owner prior to sending your product back. Absolutely no refund will be considered after 30 days from purchase.

Item may not be copied, reproduced or resold.
Patent Pending.